RDX 14 DIRECT FIT Electric Cooling Radiator Fan Kit LandRover Defender 200 Tdi

  
RDX 14 Radiator Fan with DIRECT FIT Brackets & Thermostat Alloy HELLA Switch Kit This kit fits ALL Defender 200 Tdi from 1990 to 1994 At last an fordable Bolt on Radiator kit, no cable tie style fittings just unbolt the old radiator cowling, bolt the super strong thick 3mm mounting brackets to the radiator frame, its that simple. The brackets are designed to be strong and do not have lots of holes in so cold air is drawn into the fan just like a factory system. This kit uses a factory style Thermostat switch activates at a set temperature and turns off at a set temperature, this set temperature cannot be adjusted. This kit uses the RDX hose adapter.

The RDX Hose Adapter must be fitted into the Top hose where the coolant will be at its highest temperature that can be measured. 14 Fan (not overall size) 12 volt. RDX Thermostat Switch Adapter consists of: HELLA Thermo switch fitted to 38mm Hose adapter Thermostat Switch activates at. And turn off at 87.

There are 2 terminals on the HELLA Thermo Switch one for earth and the'Activate' earth switch ouput (can be wired either way round). Relay Pin 30 should go to a fused 12volt supply Pin 87 Positive terminal of Electric Fan Pin 85 Earth output from Thermo Switch Pin 86 Positive feed from ignition. Prevents fan running when engine is off. To override the Thermo Switch place an On/Off switch on Dashboard with one side connected to earth and the other DIRECT to Pin 85 of the Relay. We recommend you turn fans off when wadding through water.

Airflow: Pull means pull air through radiator Size (Overall): Width 358mm (14 1/4") Height 378mm (15") Depth 85mm (3 1/2). Suggested application Primary fan for Engines over 2000cc.

This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Other Car Parts & Accessories". The seller is "boltonbits" and is located in this country: GB.

This item can be shipped to United Kingdom.

• Brand: RDX
• Manufacturer Part Number: 1